Rotary Hoist Range
- 2 Post
- 4 Post
- Scissor Lifts
- Alignment Lifts
- Portable
- In ground Lifts
- HD 2 Post Hoists
- HD 4 Post Hoists
- HD Parallelogram
Scissor Lifts
Versatility:Rotary's Low-Rise and Mid-Rise lifts are great for tire mounting and rotation, brakes, exhaust and other jobs requiring clear access.
Available Models
Low Rise 3.1 tonne Scissor lift
Standard Features
- Driver-over ramps and side rails support wider vehicles on approach
- Dual lifting cylinders for smooth lifting
- (4) heat resistant pads
- Three-position wheel spotting dish
- Third party certified
- 3,175 ks. capacity
VLXS7 Adapters
- (4) 1 1/2 in rubber blocks
- (4) 3 in rubber blocks
- Optional set of 4 three-position adapters
Available Models: VLXS7
Low Rise 4.5 tonne Scissor lift
Standard Features
- Driver-over ramps and side rails support wider vehicles on approach
- Dual lifting cylinders for smooth lifting
- (4) heat resistant pads
- Three-position wheel spotting dish
- Third party certified
- 4,535 kg. capacity
VLXS10 Adapters
- (4) 1 1/2 in rubber blocks
- (4) 3 in rubber blocks
- (4) three-position adapters
Available Models: VLXS10
Mid Rise 2.7 tonne Portable Scissor lift
VMRX Mid Rise Portable Scissor Lift
Standard Features
- Portable and easy to move
- Dual lifting cylinders for smooth lifting
- Fast operation: 20-30 seconds to full rise
- Multiple locking positions at any height
- Third party certified
- Full 2,721 kg. capacity
VMR6 Adapters
- Truck adapters
Available Models: VLXS10
VLXS7 & VLXS10 Specifications
The VLXS10 is your solution for quick service operation on today’s passenger cars and trucks up to 10,000 lbs.
Tire and brake work can now be performed on a wide r variety of vehicles, thanks to the newly designed pads and adapters, wider drive over capability and increased lifting capacity.
The pad and adapter combinations allow lifting of uni-body and frame contact undercarriages — reaching recommended manufacturers pick-up points on most vehicles on the road today.
Trucks and SUVs that require a wider drive-over capability will not be turned away. The VLXS10 has ramps and side drive-over areas to accommodate wider wheelbase vehicles.
The 10,000 lbs. capacity offers the ability to lift the heavier vehicles being sold today. The VLXS10 is truly the heavy-weight winner when comparing mid and low-rise lifts.
Features
- Driver-over ramps and side rails support wider vehicles on approach
- Dual lifting cylinders for smooth lifting
- (4) heat resistant pads
- Three-position wheel spotting dish
- Third party certified
- 3,175 - 4,535 kg. capacity
VLXS10 Adapters
The new three-position adapters have rubber contact pads on three sides increasing the positioning capabilities.
The height added by these adapters excels the versatility of the lift. The adapters can be laid flat for 4 5/16” (110mm) additional height or on the side for 6 5/16” (160mm). Achieve maximum extension by laying the adapter on end and allowing an additional 8 9/16” (218mm) of height.
The VLXS10 also comes with a set of four 1 1/2” rubber block adapters for low-profile vehicles.
VLXS7 Adapters
The 7,000 lb. capacity low-rise lift comes standard with a set of rubber blocks for quick access to lower profile and uni-body frame vehicles. Blocks are 1 1/2” and 3” in height.
