Rotary Hoist Range
- 2 Post
- 4 Post
- Scissor Lifts
- Alignment Lifts
- Portable
- In ground Lifts
- HD 2 Post Hoists
- HD 4 Post Hoists
- HD Parallelogram
2 Post Hoists
(both symmetrical and asymmetrical) ranging from 3.2 tonne to 8 tonne lifting capacity.
Vehicles come in many different sizes and shapes. So do service centers. No matter what the mix of vehicles you see, no matter what the layout of your facility, there is a Rotary two-post hoist to meet your needs.
Available Models
Standard 2 Post SP0A10 Features
- True asymmetric, with columns at rotated 30º. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
- “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
- Pads allow for quicker vehicle spotting and greater vehicle throughput
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Automatic Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 4,500 kg. capacity
Options
- Extended height
- in bay ® (A10i) models include: Up/Down, lock controls on each column with air and electric outlets
- 3-stage arms for greater extension and retraction
Available Models: SPOA10, SPOA10i
Standard Features
- Asymmetric, This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
- “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Automatic Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 3,000 kg. capacity
Options
- Extended height
- in bay (A10i) models include: Up/Down, lock controls on each column with air and electric outlets
- 3-stage arms for greater extension and retraction
Available Models: SPOA10, SPOA10i
2 Post Symmetric Clear Floor 4.5 - 8.1 tonne
Standard Features
- True symmetric column design
- “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Automatic Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 4,535 kg - 8,100 kg capacities available
Options
- Extended height
- in bay® (S10i, S12i-RA) models include: Up/Down, lock controls on each column with air and electric outlets
- 3-stage arms for greater extension and retraction
Available Models: SPO10, S10i, SPO12-RA, S12i-RA, SPO15, SPO18
2 Post Asymmetric Clear Floor 4.5 tonne Pad Lift
Standard Features
- True asymmetric, with columns at rotated 30º. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
- “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
- Pads allow for quicker vehicle spotting and greater vehicle throughput
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Automatic Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 4,536 kg capacity
Options
- Extended height
- in bay® models include: Up/Down, lock controls on each column with air and electric outlets
- Heavy-duty wheel forks
- Magnetic lug nut tray
Available Models:SPOA10, SPOA82, SPO10
2 Post Hoists, Engineered for Productivity
For decades, Rotary® has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market.
Service and Support
With Rotary lifts, you have the service and support you need. Our world-wide network of service companies are always standing by.
Lift Safety Standards
Most of our lifts are third party tested by ETL and certified by ALI to meet or exceed strict ANSI standards such as cable cut and deformation tests. Be sure the lift you buy has the gold ALI/ETL label that assures your lift has been tested to meet these standards.
2 Post Hoist, Key Productivity Features
The three-stage arm increases overall arm sweep and minimum arm reach to precisely lift vehicles that have:
- Uni-body construction**
- Visually marked pick-up points on the vehicle
- Wider vehicle tread width and lower profile (min. adapter height 12cm)
- A short or long wheelbase Controls on each column with 110V electric and air outlets right on the lift make this two-post lift the ultimate choice for productivity seeking technicians and managers.
Technician Productivity Features
- Unlike most other lifts, Rotary® power units are designed, tested and built by Rotary, for Rotary lifts. We don’t use 3rd party power units which are for universal applications.
- Adjustable height options on two-post column extensions gives you flexibility to lift and service taller vehicles.
- The patented “Double S” single piece construction column design provides a channel for the bearings to travel that maximizes the strength of the column and surface contact area of the bearing.
- Slider block bearings of Tivar 1000 polyethylene are self-lubricating and maintenance free.
- High-pressure cylinders in each column provide maximum lifting force and smooth operation.
- Automatic Arm restraints make positioning of arms easy. They engage when the lift is raised and automatically disengage when the lift is fully lowered.
- Overhead padded switch bar to prevent damaging a vehicle by raising it too high.
Lift Column Orientation Options
True Asymmetrical Lifts
(SPOA/A series)- Columns are rotated 30°
- Places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
- Allows maximum door opening on passenger cars for improved access to vehicle interior
True Symmetrical Lifts
(SPO/S series)
- Columns are not rotated Vehicle load is centered between the columns to maximize lifting capacity
- Lift capacities 4,535 kg to 8,164 kg
- More width between columns to accommodate larger vehicles and improve vehicle access
- Allows max door opening on trucks and vans for improved access to vehicle interior
Arm Configurations
- Asymmetrical two-stage arms are the standard configuration designed to accommodate a wide range of typical vehicles with three-position adapters.
- Symmetrical two-stage arms are the standard configuration designed to accommodate a wide range of typical vehicles with three position adapters
- Asymmetrical three-stage front arm that increases overall arm coverage and minimum arm reach for hard to lift vehicles.
- Symmetrical three-stage front and rear arms that increase overall arm coverage and minimum arm reach for hard to lift vehicles
Overhead Heights and Lift Width Configurations
Extended height (EH) options are available to maximize the working height under tall vehicles. EH models come with a standard higher rise of 2.05m. Asymmetrical 4,535 kg models accommodate narrow bays by adjusting the columns in 15.24cm.
Conventional Features
- Conventional two-hand operation
- Power unit down
- Manual release locking system
in bay® Features
- One touch controls on each column
- Power unit up and out of the way
- Integrated air/electric connections
- Tool storage rack
- Electronic locks
Dual Controls
OSHA compliant lockable disconnect switch is standard on in bay models. This feature avoids the need to pay extra for a lockable disconnect required to meet local electric codes.
Asymmetric i models come standard with polymer adapters that thread-up or have optional stackable inserts. No metal to metal contact.
Fixed pad contact lifts are perfect for quick vehicle spotting and can increase vehicle throughput. This is the perfect lift for a quick-lube bay.
|
Model: |
SPOA10 A10i |
SPOA10-RA A10i-RA (3-stage front arm) |
|
|
A. |
Rise* |
78 1/4” (1981mm) 81 1/4” (2064mm) |
73 7/8” (1876mm) 76 7/8” (1953mm) |
|
B. |
Height Overall: Standard EH1 EH2 EH4 |
11’ 8 1/2” (3569mm) 12’ 8 1/2” (3873mm) 13’ 8 1/2” (4178mm) N/A |
11’ 8 1/2” (3569mm) 12’ 8 1/2” (3873mm) 13’ 8 1/2” (4178mm) N/A |
|
C. |
Width Overall** (outside of base plate) |
11’ 5 1/2” (3493mm) |
11’ 5 1/2” (3493mm) |
|
D. |
Drive-Thru Clearance |
95 1/4” (2416mm) |
95 1/4” (2416mm) |
|
E. |
Floor To Overhead Switch |
11’ 2 3/4” (3423mm) |
11’ 2 3/4” (3423mm) |
|
F. |
Reach (front arm min.) |
20 1/2” (521mm) |
21 5/8” (550mm) |
|
G. |
Reach (front arm max.) |
40 3/4” (1036mm) |
43 1/2” (1106mm) |
|
H. |
Reach (rear arm min.) |
40 1/4” (1019mm) |
34 1/2” (878mm) |
|
I. |
Reach (rear arm max.) |
61” (1548mm) |
58” (1474mm) |
|
J. |
Min. Adapter Height |
4 3/4” (121mm) |
3 5/8” (93mm) |
|
K. |
Low Step Height |
7” (178mm) |
N/A |
|
L. |
High Step Height |
10 1/4” (260mm) |
5 7/8” (149mm) |
|
M. |
Inside Columns |
107 1/4” (2727mm) |
107 1/4” (2727mm) |
|
N. |
Cylinder Height (full rise)* |
11’ 10 3/4” (3626mm) 12’ 4 3/4” (3778mm) |
11’ 10 3/4” (3626mm) 12’ 4 3/4” (3778mm) |
|
Lifting Capacity |
10,000 lbs. (4536kg) |
10,000 lbs. (4536kg) |
|
|
Motor / Voltage 1Ø |
2 HP / 208v-230v |
2 HP / 208v-230v |
|
|
Time of Full Rise |
45 seconds |
45 seconds |
|
|
Ceiling Height Required: Standard EH1 EH2 EH4 |
12’ (3658mm) 12’ 9” (3886mm) 13’ 9” (4191mm) N/A |
12’ (3658mm) 12’ 9” (3886mm) 13’ 9” (4191mm) N/A |
|
|
Max Load (per arm) |
2,500 lbs. (1134kg) |
2,500 lbs. (1134kg) |
|
|
Model: |
SP010 S10i |
SP010-RA S10i-RA |
SPO12-RA S12i-RA |
SPO15 S15i |
SPO18 S18i |
||
|
A. |
Rise* |
78 1/4” (1981mm) 81 1/4” (2064mm) |
80 1/4” (2038mm) 83 1/4” (2115mm) |
80 1/4” (2038mm) 83 1/4” (2115mm) |
89 1/2” (2273mm) |
89 1/2” (2273mm) |
|
|
B. |
Height Overall: Standard EH1 EH2 EH4 |
11’ 8 1/2” (3569mm) 12’ 8 1/2” (3873mm) 13’ 8 1/2” (4178mm) 15’ 8 1/2” (4788mm) |
11’ 8 1/2” (3569mm) 12’ 8 1/2” (3873mm) 13’ 8 1/2” (4178mm) 15’ 8 1/2” (4788mm) |
13’ 8” (4166mm) 14’ 8” (4470mm) 15’ 8” (4775mm) LC: 12’11-1/2” or 13’4” |
15’-16’ 6”(4572-5029mm) LC: 13’ 6”-14’ 6” (4115-4420mm) N/A |
15’-16’ 6”(4572-5029mm) LC: 13’ 6”-14’ 6” (4115-4420mm) N/A |
|
|
C. |
Width Overall** (outside of base plate) |
11’ 5 1/2” (3493mm) |
11’ 5 1/2” (3493mm) |
11’ 5 5/8” (3496mm) |
12’ 11” (3937mm) |
12’ 11” (3937mm) |
|
|
D. |
Drive-Thru Clearance |
102 1/2” (2603mm) |
102 1/2” (2603mm) |
102 3/8” (2600mm) |
105 3/4” (2686mm) |
105 3/4” (2686mm) |
|
|
E. |
Floor To Overhead Switch |
11’ 2 3/4” (3423mm) |
11’ 2 3/4” (3423mm) |
13’ 3 1/8” (4042mm) |
14’ 5”-15’ 11” (4394-4851mm) |
14’ 5”-15’ 11” (4394-4851mm) |
|
|
F. |
Reach (front arm min.) |
31” (787mm) |
27 1/2” (699mm) |
27 1/2” (699mm) |
37 1/2” (952mm) |
37 1/2” (952mm) |
|
|
G. |
Reach (front arm max.) |
54” (1372mm) |
59” (1499mm) |
59” (1499mm) |
62” (1574mm) |
62” (1574mm) |
|
|
H. |
Reach (rear arm min.) |
31” (787mm) |
27 1/2” (699mm) |
27 1/2” (699mm) |
37 1/2” (952mm) |
37 1/2” (952mm) |
|
|
I. |
Reach (rear arm max.) |
54” (1372mm) |
59” (1499mm) |
59” (1499mm) |
62” (1574mm) |
62” (1574mm) |
|
|
J. |
Min. Adapter Height |
4 3/4” (121mm) |
4 3/4”-7 1/4” (121-184mm) |
4 3/4”-7 1/4” (121-184mm) |
5 3/4”-7 1/2” (146-190mm) |
5 3/4”-7 1/2” (146-190mm) |
|
|
K. |
Low Step Height |
7” (178mm) |
8 1/4”- 10 3/4” (210-273mm) |
8 1/4”- 10 3/4” (210-273mm) |
10 3/4” - 12 1/2” (273-318mm) |
10 3/4” - 12 1/2” (273-318mm) |
|
|
L. |
High Step Height |
10 1/4” (260mm) |
9 3/4” - 12 1/4” (248-311mm) |
9 3/4” - 12 1/4” (248-311mm) |
15 3/4” - 17 1/2” (400-445mm) |
15 3/4” - 17 1/2” (400-445mm) |
|
|
M. |
Inside Columns |
114 1/2” (2908mm) |
114 1/2” (2908mm) |
113 3/8” (2880mm) |
120” (3048mm) |
120” (3048mm) |
|
|
N. |
Cylinder Height (full rise)* |
11’ 10 3/4” (3626mm) 12’ 4 3/4” (3778mm) |
11’ 10 3/4” (3626mm) 12’ 4 3/4” (3778mm) |
N/A |
N/A |
N/A |
|
|
Lifting Capacity |
10,000 lbs. (4536kg) |
10,000 lbs. (4536kg) |
12,000 lbs. (5443kg) |
15,000 lbs. (6804kg) |
18,000 lbs. (8165kg) |
||
|
Motor / Voltage 1Ø |
2 HP / 208v-230v |
2 HP / 208v-230v |
2 HP / 208v-230v |
2 HP / 208v-230v |
2 HP / 208v-230v |
||
|
Time of Full Rise |
45 seconds |
45 seconds |
60 seconds |
85 seconds |
85 seconds |
||
|
Ceiling Height Required: Standard EH1 EH2 EH4 |
12’ (3658mm) 12’ 9” (3886mm) 13’ 9” (4191mm) 15’ 9” (4801mm) |
12’ (3658mm) 12’ 9” (3886mm) 13’ 9” (4191mm) 15’ 9” (4801mm) |
13’ 9” (4191mm) 14’ 9” (4496mm) 15’ 9” (4801mm) N/A |
15’ 1” min (4597mm) LC: 13’ 7” min (4140mm) N/A N/A |
15’ 1” min (4597mm) LC: 13’ 7” min (4140mm) N/A N/A |
||
|
Max Load (per arm) |
2,500 lbs. (1134kg) |
2,500 lbs. (1134kg) |
3,000 lbs. (1360kg) |
3,750 lbs. (1700kg) |
4,500 lbs. (2041kg) |
||
|
Min. Bay Size |
12’ x 24’ (3658 x 7315mm) |
12’ x 24’ (3658 x 7315mm) |
12’ x 26’ (3658 x 7925mm) |
15’ x 30’ (4572 x 9144mm) |
15’ x 30’ (4572 x 9144mm) |
||
