Hunter Tyre Changers
Hunter Tyre changers blank blank blank blank blank
Available Models
- Passenger Vehicle and Lite Commercial
- Commercial Vehicles
About Hunter
Tyre Changer, Hunter TCX575
Tyre Changer, Hunter TCX575
TCX575
Standard Features
- Automatic Leverless Tyre Changer with Bead press System.
- Fast and Easy Leverless Tool Head.
- Space Saving Automatic Swing Arm.
- 2-Speed Forward Rotation and Single Speed Reverse Rotation Via a 240V High Torque Motor.
- Bead Inflation System.
- Table Top Clamping System Easily Handles Rims 12-30 inches.
- Adjustable Bead Shovel.
- Adjustable Table Height for narrow and Wide Wheels.
- Tall or Short Operators.
- Standard Accessories are: Tyre Paste, Paste Brush, Bead Lever, and Polymer Protective Guards.
Options
- Wheel Lift.
- Motorcycle adaptors.
- Bead Depressor Block kit.
Models Available
- TCX575.
- TCX575W. (Includes Wheel Lift)
Superior performing expert package
Fast and Easy Leverless Tool Head
Easy to operate controls:
- Simple switch activates leverless system
- Familiar mount head design
- Familiar mounting techniques
Leverless operation eliminates:
- Technicians straining to pull over tough beads
- Damage of beads with thick levers
- Rim damage from lever during demounting
Locking Lower Arm
Superior Clamping
Handles Oversized Wheels
- The tabletop clamping system easily handles 12- 30 inch wheels safely with standard outside clamping accessories
- The radiused table design allows easy bottom bead access, while ensuring rigidity for large diameter wheels
- Four self-centering clamps are actuated by two heavy-duty pneumatic cylinders – 40% more clamping force than single cylinder designs
High-Quality Clamping Jaws
Automatic swing arm
- With the push of a single button, the swing arm locks the wheel diameter and width
- The automatic swing-arm design does not require the extra space used by tilt-column tire changers
- 30% smaller footprint than tilt-column designs
- Foot pedal operation keeps hands free
Powerful motor and drive
- Two-speed forward (7 and 17 rpm) for speed or finesse
- Single-speed reverse (7 rpm)
- 220V high-torque motor delivers ample power for difficult conditions
Adjustable side shovel
- Three-way adjustable shovel angle
- Large wheel pad enables service on a wide range of custom wheels
- Shovel protector sleeves are supplied standard for alloy wheel protection
Dynamic bead press system
The Bead Press System speeds and eases clamping, lubricating, demounting and mounting the toughest wheel and tire combinations. The patented design centers the wheel and tire to ensure maximum service strength and rigidity.
Specifications
Electrical: 220V, 1 ph, NEMA plug type L6-20P
Air pressure operating range: 110-145 psi
Air volume of inflation tank: 4.75 gallons
Wheel clamping (nominal)
External clamping (min-max): 12 - 24 in.
Max with extension jaws (included): 30 in.
Internal clamping (min-max): 14 - 28 in.
Table rotation speed
Electric Motor:
CW - 7 rpm and 17 rpm
CCW - 7 rpm
Tire diameter: 43.3 in. w/BPS
Tire width maximum
Table raised position: ~ 12.8 in @ 26.6 in. height
Table lowered position: ~ 14.3 in @ 23 in. height
Bead loosener width: 17 in.
Shipping Weight: 950 lbs.
Max. Space Dimensions:
65 in. (L) x 76 in. (H) X 59 in. (W)
† Some dimensions, capacities and specifications may vary depending on tire and wheel configurations or options.
TCX575 includes:
BPS including:
- Primary travel arm
- Secondary fixed arm
- Pressing cones (standard and light)
- Pressing cone extension
- Lifting disk
6 in. clamping jaw extensions
(1) Standard bead lever and bead lever polymer protectors
Shovel protectors (polymer)
Clamping jaw protectors (polymer)
Ordering information:
TCX575 - Electric leverless tabletop changer
TCX575W - Electric leverless tabletop changer with wheel lift
Popular equipment upgrades
Aluminum Clamp
Drop-center clamp (RP11-8-11400070) can be used as a traction point or bead guide. Guides bead into drop-center.
Wheel Lift
Optional wheel lift (20-2044-1) eases servicing of large assemblies. Allows for more careful handling of expensive wheels.